lk
MON - FRI 8AM - 5PM

Bijur’s Lubrication Solution for Asphalt Pavers

Overview

Your mobile investment is significant, the equipment is large, and it operates in extreme and demanding conditions day in and day out. An automatic lubrication system can maximize your equipment’s life and help to avoid unforeseen equipment shutdowns. The system greases every point while the equipment is in operation, maintaining a constant seal at the friction points creating a grease barrier to protect and prevent contaminants from entering the wear surfaces. No manual intervention is required to reach the lubrication points, allowing for increased operation safety. Save time and keep your employees safe with an automatic lubrication system that increases your equipment life and helps you avoid costly repairs.

Features & Benefits

  • The system greases every point while the asphalt paver is in operation and maintains a constant barrier at bushings preventing dust and dirt from entering wear surfaces.
  • Increased safety as there is no need to crawl under or over equipment to service hard-to-reach lubrication points.
  • Gain 30 minutes or more of operating time per day with an R.O.I. of less than 12 months.

System Design for Asphalt Paver

Multiport II Pump

The MultiPort II lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve systems to accurately control the amount of grease and to monitor system performance via an integral controller. This pump features an economical built-in controller with improved water resistance and cold weather performance. With an IP69K rating, it is the perfect fit for on-road mobile applications.

PVMB Progressive Divider Valve

PVB Mobile Divider Valves accurately meter and dispense lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi (248 bar). Output volumes are fixed at 0.17cc (0.01 cu. in.) per cycle but can be combined with other outlets by using appropriate fittings for larger outputs. Valves are available with cycle indicator pins to provide visual confirmation of system operation. In addition, the cycle pin can be fitted with a switch to provide electrical feedback to a system controller.

LIKE WHAT YOU READ? GIVE US A SHARE

LinkedIn
Email

RECENT POSTS

SOCIAL MEDIA

SUBSCRIBE TO OUR NEWSLETTER

GET IN TOUCH

We’re looking forward to working with you. Whether you have questions about products or services, our team is ready to help.