Category: Uncategorized

Whether your equipment utilizes oil or grease, there are some best practices and things to consider when preparing for the winter months ahead. At really low temperatures oil can congeal and stop flowing.  When this happens, preventable wear and tear is occurring in your equipment.  The same is true for greaseable lubrication points, as well.  As it gets colder, viscosity increases and it’s harder for your lubricant of choice to get where it’s needed. 

Adding a Bijur Delimon lubrication system increases equipment life by decreasing wear on vital components. Automatic lubrication systems safely and continuously supply lubricant while your equipment is running. Lower operating and maintenance costs.
Greater dependability and reduced wear.
Reduced risk of lubrication-related breakdowns. Reduced environmental impact by avoiding
over-greasing.
Extended service intervals. Air-operated barrel pumps are used where medium to heavy duty service conditions exist
and rapid build-up of lubricating system pressure is desired in either air-operated central
stations or bulk transfer of lubricants.
Air-operated barrel transfer pumps are normally used to transfer lubricants from original
refinery drums to the reservoirs on central lubrication systems.

The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve systems to accurately control the amount of grease and to monitor system performance via an integral controller. The corrosion-resistant PVBM Divider Valve dispenses lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi. This compact valve can be located near the lube points to accurately dispense grease automatically to the entire machine. Valves are available with cycle indicator pins to provide visual confirmation of system operation. In addition, the cycle pin can be fitted with a switch to provide electrical

The AirMax is a simple economical lubricator, ideally suitable for air-oil systems. The AirMax is supplied with a 3-liter reservoir, pressure gauge, and oil inlet filter with the options of an oil pressure switch, low-level switch, solenoid valve, and timer. The AirMax comes complete with a pumping unit and an integrated air-oil injection system. The required number of oil injectors and the delivery on each port can be selected from the smart number.

The CLP Cartridge Pump is a robust electrically driven single outlet lubrication pump,
designed primarily for use with progressive divider valve systems. The pump is capable
of utilizing most standard off the shelf industry grease cartridges, including DIN1284,
Lube Shuttle and Fuchs. The CLP is available with 12 and 24 VDC motors, making it
suitable for both mobile and standard industrial applications. An integral controller is
available, or the unit can be configured to be controlled by an external controller.