lk

Increase Chain Life & Performance with Bijur

Bijur Delimon

Designers and builders of world-class lubricating systems and equipment.

September 21, 2021 // 1 minute read

Airmax Air Oil Lubrication System

  • Significantly increases chain life.
  • Reduced chain wear improves accuracy and provides better performance.
  • No sophisticated controls are required. Fully stand-alone with onboard timer or ties into existing controls.
  • Environmentally friendly. Reduces waste.
  • Optional enclosures are available for “wash down” (CIP) conditions.
  • Increased output and production up-time.
  • Precise delivery.
  • Prevents bearing contamination.
  • Cooling of lubricated parts.
  • Unmatched lubricant delivery accuracy.
  • Includes low oil switch, integral timer with optional oil pressure switch.

Proven Quality, Reliability, & Accuracy

The AirMax is a simple economical lubricator, ideally suitable for air-oil systems. The AirMax is supplied with a 3-liter reservoir, pressure gauge, and oil inlet filter with the options of an oil pressure switch, low-level switch, solenoid valve, and timer.

The AirMax comes complete with a pumping unit and an integrated air-oil injection system. The required number of oil injectors and the delivery on each port can be selected from the smart number.

The AirMax includes an air-actuated, spring return piston pump. The inlet air pressure supply to the pumping element determines the output oil pressure. When used with positive displacement injectors (PDI) the minimum oil pressure should be 260 PSI (18 bar).

For extended service, incoming air must be dry. Always use a suitable FRL unit (filter/regulator lubricator) to control the inlet air supply to the pumping unit (set air to recommended operating pressure). The AirMax pumping unit is cycled using a 3/2-way solenoid valve (typical cycle; 5 seconds “on” and 30-300 seconds “off”).

A continuous air supply is required to the air-oil injection block and it should be separately regulated to control the air-oil flow rate to the lube point.

CONNECT wITH ANDREW KEHOE

Inside Sales Coordinator

Whether you have questions about products, services, or a demo, our team is ready to help.

*Your information will not be shared beyond our organization. The information collected is simply used to better assist you. 

580 Davies Drive,
York, PA 17402

Tel: 717-885-2614
Email: hello@greasepoint.com